
Riverview Cabinet Refacing
Commercial Cabinet Refacing in Riverview, FL
Commercial cabinet refacing for Riverview businesses: break rooms, offices, and retail counters. Written estimates, no downtime.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Riverview and nearby communities.
Riverview Cabinet Refacing works with offices, retail counters, break rooms, and other commercial spaces that need a cabinet upgrade without a full gut renovation. A lot of commercial cabinetry gets installed once during buildout and never touched again, which means by the time a tenant improvement rolls around or a lease renews, the boxes are sound but the doors, laminate, and hardware look fifteen years older than the rest of the space.
Refacing lets a business owner or property manager fix that without closing down or tearing out cabinetry that still works structurally.
What's included
What's included
Typically included: box inspection and structural assessment, new door and drawer fronts matched to the existing cabinet layout, commercial-grade hardware and hinges rated for higher cycle counts, and a final walkthrough before the crew leaves.
Optional: antimicrobial surface coatings for break room or retail food-adjacent counters, upgraded drawer slides for filing or storage cabinets that see constant open-close use, and color or finish changes to match a rebrand or new signage package.
Customer prep: clearing out cabinet contents before the crew arrives and flagging any areas that need to stay accessible during business hours so scheduling can work around them.
Want a clearer scope?
Get a Free EstimateHow it works
Our process
Step 1Site Evaluation
Commercial spaces are assessed to plan refacing around daily operations.
Step 2Scheduling Coordination
Work is scheduled to minimize disruption to business activities.
Step 3Durable Material Selection
Commercial-grade materials are chosen for high-traffic durability needs.
Step 4Box and Surface Prep
Cabinet boxes are prepared to withstand frequent commercial use.
Step 5Refacing Installation
New surfaces, doors, and hardware are installed across commercial cabinetry.
Step 6Compliance Check
Finished work is reviewed to ensure it meets commercial use standards.
Materials
Materials and methods we use

Commercial-Grade Laminate
Heavy-duty laminate withstands frequent use in commercial environments.

Reinforced Hinges
Reinforced hinges handle increased daily use in commercial settings.

Impact-Resistant Panels
Panels resist dents and damage common in high-traffic areas.

Heavy-Duty Drawer Slides
Slides support frequent, repeated use in commercial cabinetry.

Antimicrobial Surface Coating
Coatings help reduce surface bacteria in commercial applications.

Commercial Hardware Sets
Durable hardware sets are built for long-term commercial performance.
Questions on materials?
Get a Free EstimateTimeline
How long does a commercial refacing job take?
Most commercial jobs move faster than a residential kitchen because the cabinet footprint is usually smaller, a break room run, a reception counter, a row of office storage. The bigger variable is access.
- 01
Site evaluation
same day - 02
Material and hardware ordering
2 weeks1 to
- 03
Installation
3 days1 to depending on linear footage and after-hours access
- 04
Final walkthrough
same dayas install completion
Need a schedule that fits?
Get a Free EstimateCost
What does commercial cabinet refacing cost in Riverview?
Commercial pricing runs on the same mechanics as residential refacing, door count, hardware grade, and box condition, but with added weight given to durability specs. A free estimate after the site evaluation is the only way to get real numbers, but here's the general range.
| Project type | Typical range | What’s included |
|---|---|---|
| Reception or counter area | $1,500–$4,000 | door and hardware swap on a single counter run. |
| Break room or small kitchenette | $3,000–$8,000 | full cabinet set with upgraded hardware. |
| Office storage or filing banks | $2,500–$7,000 | drawer-heavy layouts with reinforced slides. |
| Multi-room buildout | $8,000–$20,000+ | several rooms refaced on a coordinated schedule. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and codes for commercial cabinet refacing
Permit rules vary by occupancy type and property manager requirements, so check with Hillsborough County or your landlord's building department before scheduling.
| Typically needs a permit | Often no permit |
|---|---|
| Any job that involves relocating plumbing or electrical for a break room sink or outlet | Door |
| Work tied to a larger tenant improvement or build-out permit already filed with the county | drawer front |
| — | hardware replacement on existing boxes |
| — | Surface refinishing or laminate replacement with no layout changes |
| — | Hardware upgrades like hinges and drawer slides |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for commercial cabinet refacing
| DIY | Hire a pro |
|---|---|
| Swapping a handful of pulls or knobs on low-traffic storage cabinets | Matching finishes across a multi-room buildout so everything looks consistent |
| Touching up minor scuffs on laminate that isn't peeling or delaminating | Working around business hours without shutting down operations |
| — | Selecting hardware rated for commercial cycle counts instead of residential-grade parts that wear out fast under daily office or retail use |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call us
Call (385) 555-0100 or request a free estimate to get a site evaluation scheduled around your business hours. <!-- rover-autofix-links -->
- Break room or reception cabinets look dated next to a recent remodel or rebrand
- Hardware is loosening or hinges are failing from daily high-traffic use
- Laminate is chipping or peeling on counters that see constant hand contact
- A tenant improvement or lease renewal gives you a window to update cabinetry without a full remodel budget
- [Home](/)
Seeing warning signs?
Get a Free EstimateNext step
Get a free estimate
Riverview Cabinet Refacing scopes commercial jobs around your schedule, not the other way around. Call (385) 555-0100 or use the contact form to set up a site evaluation.
More services
Other Cabinet Refacing services

Cabinet Refacing
Cabinet refacing in Riverview: new doors, veneer, and hardware over sound boxes. Free estimates, written scope before work starts.

Kitchen Cabinet Refacing
Kitchen cabinet refacing in Riverview: uppers, lowers, island, and hardware refreshed around your existing layout. Free estimates.

Bathroom Vanity Refacing
Moisture-tolerant vanity doors, drawer fronts, and hardware refacing. Free written estimates, no pressure.
Ask about Commercial Cabinet Refacing
Tell us about the project and how to reach you.