
Riverview Cabinet Refacing
Cabinet Refacing in Riverview, FL
Cabinet refacing in Riverview: new doors, veneer, and hardware over sound boxes. Free estimates, written scope before work starts.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Riverview and nearby communities.
Cabinet refacing keeps the boxes and swaps everything you touch and see: doors, drawer fronts, veneer, hardware. It works when the boxes are square and the frame is solid. The finish is just tired.
Riverview Cabinet Refacing checks box condition on-site before quoting anything. That matters here. Riverview's housing stock runs from older construction with boxes still structurally sound to newer builds that barely need more than a door swap. Either way, the assessment happens first.
What's included
What's included
- Box inspection and prep — every cabinet gets checked for square, moisture damage, and loose joints before a quote goes out.
- New veneer on exposed surfaces — sides, face frames, and any visible panel get resurfaced to match the new doors.
- New doors and drawer fronts — sized to your existing openings, in the style and finish you pick.
- Hardware swap — hinges, pulls, and slides updated to match the new look, soft-close available.
- Edge banding and detail work — exposed edges get finished so nothing looks unfinished at the seams.
Want a clearer scope?
Get a Free EstimateHow it works
How our Cabinet Refacing process works
Step 1Cabinet Assessment
Existing cabinet boxes are inspected for structural soundness before refacing begins.
Step 2Design Consultation
Clients review finish and style samples to plan the new cabinet appearance.
Step 3Box Preparation
Surfaces are cleaned and lightly sanded to help new materials adhere properly.
Step 4Veneer Application
Matching veneer is applied to exposed cabinet surfaces for a smooth finish.
Step 5New Door Fitting
Replacement doors and drawer fronts are installed to complete the updated look.
Step 6Quality Check
Each cabinet is inspected for proper alignment, finish consistency, and smooth operation.
Materials
Materials and methods for Cabinet Refacing
Material choice matters more here than people expect. Humidity in Hillsborough County is hard on thin surfaces, so we lean toward products built to hold up.

Rigid Thermofoil
A durable foil finish wraps cabinet surfaces for a smooth, consistent appearance. It holds better in humid kitchens than thinner wraps.

Wood Veneer
Natural wood veneer offers an authentic grain look over existing cabinet boxes, and it ages well in Florida's indoor climate.

Adhesive Bonding Agents
Professional-grade adhesives ensure veneer and laminate stay securely bonded long-term, even with daily kitchen humidity swings.

Matching Drawer Fronts
New fronts are crafted to match replacement doors for a unified design.

Edge Banding
Edge banding finishes exposed panel edges for a clean, professional look.

Cabinet Hardware Sets
Coordinated hardware sets complete the refaced cabinetry with a polished finish.
Questions on materials?
Get a Free EstimateCodes & permits
Permits and codes for Cabinet Refacing
Verify with Hillsborough County before scheduling if your project touches anything beyond doors, veneer, and hardware.
| Typically needs a permit | Often no permit |
|---|---|
| Moving plumbing or electrical lines as part of a bigger remodel | Door and drawer front replacement |
| Structural wall changes tied to the same project | Box refacing with new veneer |
| — | Hardware swaps |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for Cabinet Refacing
| DIY | Hire a pro |
|---|---|
| Fine for swapping a single hinge or knob. | Peeling thermofoil or bubbling laminate, which usually means the surface bond has already failed. |
| Workable for minor touch-up paint on a box that's already sound. | Boxes that are out of square, which throws off new door alignment. |
| — | Matching an older door profile so new doors sit flush with existing frames. |
Not sure DIY vs pro?
Get a Free EstimateBefore & after
Before and after Cabinet Refacing results

Before 
After
FAQs
Cabinet Refacing FAQs
Is cabinet refacing worth it or should I just buy new cabinets?
If your boxes are square and solid, refacing gets you a new look for less money and less mess. Full replacement makes sense only when the boxes themselves are damaged or you're changing the layout.
What is the 1/3 rule for cabinets?
It's a rough budgeting guide some contractors use: if refacing would cost more than about a third of full replacement, replacement starts to make more financial sense. Most refacing jobs come in well under that line.
How long does cabinet refacing take from start to finish?
A typical kitchen runs about 1 to 2 weeks from signed estimate to final walkthrough, including the time to order doors and materials.
Do I need a permit for cabinet refacing?
Usually not, as long as the job stays within doors, veneer, and hardware. Anything touching plumbing, electrical, or structure changes that.
Next step
Get a Cabinet Refacing estimate in Riverview
Call (656) 206-5935 or request a free estimate through the contact form. We'll check the boxes first, then give you a real number.
More services
Other Cabinet Refacing services

Kitchen Cabinet Refacing
Kitchen cabinet refacing in Riverview: uppers, lowers, island, and hardware refreshed around your existing layout. Free estimates.

Bathroom Vanity Refacing
Moisture-tolerant vanity doors, drawer fronts, and hardware refacing. Free written estimates, no pressure.

Cabinet Door Replacement
Cabinet door replacement in Riverview, FL. New doors and drawer fronts on sound boxes, matched hardware, free estimates.
Ask about Cabinet Refacing
Tell us about the project and how to reach you.